No products in the cart.
Sale!
Chord Electronics Indigo with upgraded Asynchronous + SPM 1200E Nickel Integra
€19.500,00 €6.000,00
SKU: E77S3 Categories: Amplifiers, Power Amplifiers, Pre-Amplifiers Tags: Power Amplifier, Pre-Amplifier Brand: Chord Electronics 
ex Demo with guarantee
A perfect couple with huge sound and the superb Chord electronics character.
Indigo is a digital Center with CPA 5000 preamp stage.
SPM 1200E is the perfect matching to deliver fast and rhythmic sound.
Delivers 200 Watts per channel to drive any speaker.
Indigo
| Product Specification | |
| HARMONIC DISTORTION | < -103 dB (1kHz, 24-Bit @ 44.1KHz Sample Frequency) |
| < -110dB (100Hz, 24-Bit @ 44.1KHz Sample Frequency) | |
| SIGNAL TO NOISE RATIO | > 120dB |
| CHANNEL SEPARATION | > 125dB @ 1KHz |
| DYNAMIC RANGE | 120dB |
| SWITCHABLE DIGITAL INPUTS | 2 x 75Ω SP/DIF BNC Coax |
| 2 x AES Balanced XLR Input | |
| 2 x Plastic fibre optic ( TOSlink ) | |
| 1 x USB ( B type ) | |
| 1 x Bluetooth supporting A2DP Stereo Audio | |
| 1 x Digital iPod Dock input | |
| SWITCHABLE ANALOGUE INPUTS | 1 x RCA/XLR stereo analogue input |
| 1 x Analogue iPod Dock input | |
| ANALOGUE OUTPUTS | Stereo RCA Phono and balanced XLR Line Level Direct Outputs |
| Stereo RCA Phono and balanced XLR Volume Control Outputs | |
| HEADPHONE OUTPUT | 1 x ¼” headphone jack socket |
| USB HUB ( rear USB input | 2 x Front panel USB sockets |
| must be connected to PC ) | 1 x iPod dock sync |
| RAM BUFFER | 3 Settings – off, minimum & maximum |
| PHASE SWITCH | 2 Settings – Positive or Negative output phase |
| SAMPLE FREQUENCIES | 32KHz – 96KHz Single Cable, 176KHz & 192KHz Dual Cable ( Dual data mode ) |
| LINE LEVEL OUTPUT | 6V rms. Balanced. 3V rms. unbalanced |
| OUTPUT IMPEDANCE | 75Ω (short circuit protected) |
| DIMENSIONS IN MM | 420mm x 355mm x 88mm (Width x Height x Depth) |
| POWER CONSUMPTION | 30W |
| OPERATING VOLTAGE | 85 – 270 Volt AC (50 – 60 Hz) auto switching |
| WEIGHT | 12Kg |
SPM 1200E
| Output Power | 200W rms per channel @ 0.05% distortion into 8Ω,300W rms per channel into 4Ω, 360W rms into 2Ω.Thermal limitation only, 1 channel driven |
| Dynamic Headroom | 280W rms per channel into 8Ω, 360W rms per channel into 4Ω. – 1KHz, 20 cycles on, 480 cycles off. Peak pulses 8 milliseconds burst75V peak (the equivalent of 800W per channel peak into 4Ω) |
| FREQUENCY RESPONSE (8 OHMS) | -1dB, 0.2Hz to 46KHz-3dB, 0.1Hz to 77KHz |
| FREQUENCY RESPONSE (4 OHMS) | -1dB, 0.2Hz to 39KHz-3dB, 0.1Hz to 75KHz |
| SIGNAL TO NOISE RATIO | Better than -100dB, ‘A’ weighted two thirds power |
| CHANNEL SEPARATION | Better than 95dB |
| PRE-AMPLIFIER INPUT CONNECTION | 2 x gold-plated, fully balanced XLR sockets. 2 x gold-plated customphono sockets, unbalanced |
| INPUT IMPEDANCE | 100kΩ. Unbalanced/Balanced |
| ΙNPUT CAPACITANCE | <30pf. |
| OUTPUT IMPEDANCE | 0.04Ω |
| OUTPUT CONNECTIONS | 8 x 4mm rhodium binding posts (2 pairs Black, 2 pairs Red) |
| GAIN | 30dB. |
| STABILITY | Unconditional |
| DIMENSIONS | 420mm (w) x 355mm (d) x 133mm (h) |
| WEIGHT | 15Kg |
Related products
Sale!
